When buying a used machine, checking the technical condition of the car is an indispensable stage, which should by no means be neglected. It is very difficult for a non-specialist to check the condition of the car, but nevertheless, no matter how the salesman or the showroom manager assures you that the car is in good condition, you need to make sure of it yourself.Evaluation of the technical condition of the car is a complex process and to facilitate and structure it, there are several tips.

Carefully inspect the body

Most of the defects in the machine can be detected with a simple visual inspection, so always start researching the car from its body. Remember to the surface of the machine that is a scratch or chip, is a potential source of corrosion. Be sure to inspect the pre-washed car from all sides in daylight. If you notice the diversity in the color of the body, this indicates that the car has been painted, which means that an accident may have occurred in the past, and the technical condition of the car may not be ideal. Minor body defects often hide under stickers.

Check the connection points of the parts

To check the technical condition of cars on the body, you have to look under both the hood and the trunk, paying special attention to the places of joints of parts and the quality of the seals. It is necessary to check how the doors open and close, this should happen effortlessly and smoothly.

Estimate engine noise

Checking the state of the car is unthinkable without diagnosing the engine, at least by ear. To do this, start the car and listen to how it works. Smooth rumbling of the engine says that the car is in good condition, while all the noise, tapping, whistles and interruptions in the engine’s operation indicate the presence of malfunctions.How serious the problem is for a newcomer to determine is unrealistic, however, for the sake of justice, let’s say that eliminating a small defect under the hood of a car can be a simpler and quicker solution than searching for another car in perfect condition.

Conclusion: what else to see?

If the car is in good condition, its engine should start at the first time, even in the cold. Kinsbursky brothers Cadillac converters do exactly the same. Break free and tension free parts at your service. In addition to diagnosing the ICE by ear, pay attention to the fixing nuts and bolts under the hood. If they were unscrewed and this is evident, it means that the car is unlikely to be in excellent condition, as the seller tries to assure you it was not from the natural curiosity that the owner was climbing into the engine.